MACHINE INTRODUCTION
　

K   series－Industrial use Thick board

  • Suitable Rubbers：PS、PE、ABS、PC、Acrylic...etc plastic materials above 2mm.

  • Suitable Products：Inner and outer linings of refrigerators、bathtubs、cosmetic boxes、travel baggage、automobile parts、aircraft parts、fitness equipment and various general industrial big-scale products.

　

TYPE EXPLANATION ILLUSTRATION

■ KS

Single Vacuum

Forming Machine

-          Single

-          Operated by a Worker.

■ KSL

Low Type Vacuum Forming Machine

-          Single low type.

-          Operated by a Worker.

■ KSH

Vacuum&Pressure Forming Machine

-          Single

-          Operated by a Worker.

■ KD／KDP

Double Vacuum

Forming Machine

-          Double Forming

-          Operated by 2 Workers at Each Side.

-          To Produce 2 the Same or Different Shapes of Products

-          Heating in the Middle.

◎    KDP Suitable for Deeper Plug Assist.

 

■ KDH

Double Heating Vacuum

Forming Machine

-          Forming in the Middle.

-          Operated by a Worker.

-          Heating at both sides.

 

■Special Type of Machine─  Acrylic Bathtub Forming Machine (KBA) & Dryer (KBD)

  The depth of forming 600mm≧The inner lining of refrigerator
  The depth of forming 300mm≦The outer lining of refrigerator

S series-Packaging use Thin board

  • Suitable Rubbers：PS、PE、PP、PC、PET、PVC、OPS、HIPS、PLA...etc plastic materials below 2mm.

  • Suitable Products：Disposable tableware、dishes、drinking cups、deep OA cups、M-type of products、vegetable and fruit containers, small cosmetics packaging with a hanging hole、medical products packaging、safety helmets, and various general packaging containers for food and groceries.

Vacuum

Pressure

TYPE

EXPLANATION
■ SV

Vacuum Forming Machine

 Vacuum Forming Machine (SV) Feeding→ Heating→ Forming→ Cut material into single sheet, place it to Hydraulic cutting machine (ST) by worker→ Finishing.
■ SVC & SVP
High Speed Continuous Vacuum Forming Machine & Punching Machine
(SVC) Feeding→Heating→ →Punching→Finishing
■ SP
Chain Type Pressure Forming Machine		 Pressure Forming Machine (SP) Feeding→ Heating→ Forming→ Cut material into single sheet, place it to Hydraulic cutting machine (ST) by worker→ Finishing.
■ SPT (Cutting) 
Automatic Pressure Forming Machine With Tool Cutting		 Forming and Cutting on the same platform→ Finishing.
■ SPR (Ramp)
Automatic Pressure Forming Machine With Tool Puncher		 * Four-point Support Patented.
 * Forming → Punching → Cutting → Hole Punching → Finishing,

   machine finish all of the above at the same time.
■ SPC (Cam)
Automatic Pressure Forming Machine With Tool Puncher

* CAM Type
 * Forming→ Punching→ Finishing, machine finishes all of the above

   at the same time.
■ Special Type of Machine Hydraulic Cutting Machine (ST)；Cup Edge Curling Machine (SC)