S SERIES THIN BOARD - SPR (RAMP)
SPR (Ramp) Automatic Pressure Forming Machine with Tool Puncher

Application Product：

  • Strawberry box

  • Deep OA cup

  • M-type bowl

  • Disposable tableware

  • Electronics industry common packing vessel
Video     Catalogue
Material：
  • PLA、PS、PP、PVC、PET、PE、ABS...etc. Under 2mm plastic rolls.
Operating Flow： 		Optional Accessory：

  • Compressor：30HP

          Power consumption is 22.5KW

          Air consumption is 660 L/min.

  • Chiller ：

          Freezing capacity：120000 Btu/hr

          Power consumption：8.9 kw

          Compressor HP：10 HP

          Water consumption：26 L/min. (Recycle)
SPECIFICATIONS（Reference only）: Unit (mm)

SPECIFICATIONS

SPR 

Machine dimension

(W)2250 × (H)2900 × (L)5600

Material laying mechanism

(L)1190 × (W)1500 × (H)1022

Product conveyer

(L)3000 × (W)800

Weight

5000kgs

Forming area

(W)1000 × (L)700

Stroke

150

Large number of cycles

10~15 cycles/min

Heater

Upper 0.65kw×78=50.7kw

Lower 0.65ke×78=50.7kw

Heater control

Design with multi-step heating zone. Upper and lower heaters are arranged in point-to-point, or in longitudinal or cross lines Temperature is set manually by PLC and automatically switched by several sets of S.S.R and the way of control is PID.

Motor

Feeding motor：0.75kw×1
Feeding Servomotor：2.9kw×1
Forming Servomotor：11kw×1
Material Stretching Motor：0.75kw×1
Waste Removing Motor：0.75kw×1

Total power consumption

150kw。

•Design and production are available for special specifications.

•Any new modified specifications should be referred to existing machines.